PU foam spray machine for soundproofing and insulation construction.

Giá liên hệ

PU FOAM PUMPING MACHINE MODEL A 200

PU FOAM PUMPING MACHINE SOUND INSULATION INSULATION WORKS MODEL A 200 high pressure injection, works by compressed air, integrates 2 heat-drying tanks with a capacity of 50L.

PU FOAM PUMPING MACHINE MODEL A 200 High pressure, 100% new manufacturing, allows SPRAY + POLY + inject + inject polyurethane foam to ensure the actual construction conditions, with accuracy High and simple for the problem of maintenance, The high pressure A 200 high pressure soundproof insulation sprayer will serve your work professionally and best in all working conditions.

Đặt hàng ngay Gọi điện xác nhận và giao hàng tận nơi

Categories: High and low pressure Pu mixer machine, Product

The operating principle of PU FOAM PUMP SPRAYING MACHINE WORKS:

PU FOAM PUMPING MACHINE MODEL A 200 is a high pressure sprayer, works by compressed air, and integrates two 50L capacity heat-drying tanks.

PU FOAM PUMPING MACHINE MODEL A 200 high pressure is Successfully manufactured 100% new allowing SPRAY + POLY + inject + inject polyurethane foam to ensure the actual construction conditions, with accuracy High and simple for maintenance, A 200 high pressure soundproof insulation sprayer will serve your work professionally and best in all working conditions.

CONFIGURATION SPECIFICATIONS OF PU FOAM SPRAYING MACHINE WORKS:

1/ Configuration:
– 1 Polyurethane foam sprayer body
– Machine weight 120KG
– One TC -Pu spray gun cleans with compressed air
– 15m . insulation pipeline
– Two storage tanks (support for heating materials A + B)
– Maintenance kits and replacement seals

2/ Specifications .
–    Raw material ratio 1:1.1
–    Viscosity of raw material 200-2000CPS (under working temperature)
–    Maximum working pressure 2 0 Mpa (2 0 0bar)
–    Maximum liquid temperature 80°C (176°F)
–    Fireplace 8KW
–   Max output 2 – 8 kg/min
–    20 00W insulated insulated pipe
–    Self-cleaning spray gun with compressed air
–    Voltage (Optional) 1-ph 220V 50Hz
–    Compressed air source 0.5-0.8Mpa 1m³/min (73-116psi 35 cu ft)
– Output material injection pressure is 5 – 25kg/cm2
– Mixing ratio of components A, B : 1/1 to 2/1 (adjustable via inverter + PLC system).
– Continuous flow of sprayed mixture (foam) : (5-30)kg/min
– Mixing type spray pouring.
– Spray mode : Free or dosing (automatic dose cutting)

3/ Foam mixing nozzle.

In order to overcome the disadvantages of guns on the market today (mostly imported from Taiwan, China), we have researched and manufactured a soundproof foam spray gun for construction machines. It is easy to use, disassemble, repair and most importantly clean thoroughly, overcome damage during operation.

Gun performance parameters:
– Output material injection pressure is 5 – 25kg/cm2
– Mixing ratio of components A, B : 1/1 to 1.3/1 (adjustable through the pressure of the piston flow pump).
– Continuous flow of sprayed mixture (foam) : (2- 8)kg/min
– Mixing type spray pouring, spray mist, spray fine dust.
– Spray mode : Free.

FEATURES OF PU FOAM SPRAYING MACHINE WORKS:

1. Pipeline Angle joint, reduce Gun load, make operation easy.
2. Air valve can prevent trigger is fouled.
3. The auxiliary gas spring can quickly cut into the raw material mixing head.
4. Continuous and smooth linear jet, zero field control.
5. Pneumatic wrench can reduce the labor intensity of the Operators.
6. All steel hybrid head, output, precise control of spray position, reduce waste of raw materials, especially applicable to residential construction between two spray walls.
7. Single valve device can prevent ISO material and POLY material from flowing back, and not apart gun, can test gun inside most seals.
8. Manual valve switch, no tools can quickly and easily switch guns. 9. High vacuum mixed pressure to ensure the best.

CONSTRUCTION WORKS: