PU polyurethane pouring machine.
Giá liên hệ
One of the main areas is the production of electrical cabinets, distribution boxes (DB boxes), electrical cabinets. The doors of the crates of different sizes and different sizes need to be glued with PU foam. The size of the spacers can be changed in place in the range from 6mm to 20mm and the density of the gaskets can be modified, depending on the door size and sealing characteristics, so that the DB electric door can be opened and closed smoothly. comfortable. boxes with economical insulation requirements.
DESCRIPTION OF PU POLYURETHAN DOOR Gasket Making Machine:
● Convenient daily operation.
● Automatic PLC Programmable Filling Module
● Direct injection line.
● Intelligent electronic control.
● Suitable for all casting methods.
● Set spray modes.
● Special mechanical seal structure avoids reflux problem.
● Dynamic mixer directly coupled to the motor.
● Maximum output is adjusted by frequency converter with high precision motor, pump, simple and fast proportional control.
● This type of machine is specially used in the elastomeric polyurethane molding products of TDI, MDI and NDI.
Field of application : Making pu door seals, rubber gaskets, impact-resistant gaskets for doors.
Mixing unit:
Depending on the parameters of the total pouring volume and mixing ratio required by the recipe, A, B and C select high precision metering pump with high temperature resistance and low speed with precision error. measurement does not exceed (+ 0.5%). When the temperature, viscosity or pressure of the material fluctuates, the measurement and ratio are always accurate and stable.
To measure the displacement of the pump accurately, the machine uses a synchronous motor and a reducer to drive the actuator and change its speed to adjust.
Mixing head:
The machine is equipped with a precisely controlled gear pump. This results in consistent pump output and ratio accuracy.
(1) The mixing device adopts an anti-dump device with delicate structure and convenient replacement, so that the mixing shaft can run at high speed without prediction and channeling.
(2) Mixing head is made of stainless steel, straight tooth mixing head, light and durable, ensuring even mixing and no foam.
Specifications :
Output: 5~15Kg/min
AC three phase 380V + zero current + frequency (ground): 50HZ ~ 60HZ Total power 35KW wire 10 square lines
Air source: The outside diameter of the inlet pipe is 8mm, and the pressure is 0.6~0.8MPa.
Three-component mixing ratio: A:B:C=100:100-20:5~20
Raw chemical composition:
| Ingredient Name | Mixing ratio | Temperature (℃) | Viscosity(CPS) |
| A (money polyme) | 100 | 60-100 ℃ | ﹤ 2000 |
| B (MOCA, v.v.) | 20-35 | 80-125 ℃ | ﹤ 100 |
| C Paste color | 0,5-3 | Room temperature | 50-2000 |
Output: h / min:
| Item / Model | CPU30J-M1 | CPU30J-M2 | CPU30J-M3 | CPU30J-M4 | CPU30J-M5 |
| Max.Output (h / min) | 250-2500 | 1000-5000 | 3000-10000 | 5000-15000 | 10000-30000 |
| Tank capacity (L) | 160 | 160 | 250 | 250 | 400 |
| Tank capacity B (L) | 160 | 160 | 250 | 250 | 400 |
| C Tank size (L) | 30 | 30 | 80 | 80 | 80 |
| Stirrer speed (R / min) | 3000-5000 | 3000-5000 | 4000-5000 | 4000-5000 | 3000-5000 |
| Height from the ground (mm) | 1100-1400 | 1100-1400 | 1100-1400 | 1100-1400 | 1100-1400 |
| total capacity (kw) | 30 | 30 | 35 | 35 | 40 |
| Weight (Kg) | 1800 | 2000 | 2500 | 2800 | 3200 |
Liên hệ:
- Hotline: 0902.174.939
- Website: https://maypu.vn/
- Fanpage: https://www.facebook.com/mayphunputc/
- Email: thanhcongcompany39@gmail.com
- Youtube: https://www.youtube.com/@thanhcongfoam/
Be the first to review “PU polyurethane pouring machine.”
Related products
Reviews
There are no reviews yet.